| AUTOCHANGE RACK |
PRICE |
RENISHAW SERIAL # |
| Rectification (check test) |
$95 |
|
| Calibration |
$385 |
|
| Minor repair |
$745 |
|
| Major repair |
$1595 |
|
| BLP2; RBE |
$625 |
|
| Repair By Exchange ACR1 |
$3575 |
|
|
|
|
| CALIBRATION |
|
|
| ML10 Repair |
$1650 |
|
| EC10 Repair |
$1650 |
|
| Sheffco recommends that Ballbar and EC10 units are calibrated
on a yearly basis and the ML10 lasers are calibrated every 2-3 years. Traceable
Calibration Certificates will be issued at the time of calibration and enclosed with the
returned units. Ballbar calibration includes Zerodur calibration, replacement balls, pivot
assemblies, tool cups and mount assembly. A new cleaning kit will also be included. A
standard calibration takes 5 working days. An express calibration takes 2 working days.
Express calibrations must be ordered via email. |
| Ballbar calibration (standard) |
$575 |
|
| Ballbar calibration (express) |
$675 |
|
| Laser ML 10 (standard) |
$765 |
|
| Laser ML 10 (express) |
$915 |
|
| EC10 calibration (standard) |
$765 |
|
| EC10 calibration (express) |
$915 |
|
|
|
|
|
|
|
| CONTROLS |
|
|
| ACC1, ACC2, PHC9, PHC10: Calibration |
$205 |
|
| ACC1, ACC2, PHC9, PHC10: Repair |
$650 |
|
| PSU9 |
$475 |
|
| PHD9, PHD10 |
$215 |
|
|
|
|
| INTERFACES |
|
|
| PI4 and PI9 |
$255 |
|
| MI4; upgraded to MI12, RBE |
$495 |
|
| MI7; upgraded to MI12, RBE |
$495 |
|
| MI12; Board only, RBE |
$420 |
|
| MI5; RBE |
$285 |
|
| MI14 Repair |
$255 |
|
|
|
|
| MACHINE CHECKING GAGE CALIBRATION |
|
|
| Stylus |
$50 |
|
| Pivot |
$75 |
|
| Small Checking Gage Set (includes arms, pivot, and stylus) |
$245 |
|
| Large Checking Gage Set (includes arms, pivot, and stylus) |
$275 |
|
| Small Checking gage (arms and pivot) |
$205 |
|
| Large Checking gage (arms and pivot) |
$245 |
|
|
|
|
| MANUAL PROBE HEADS |
|
|
| PH1; repair |
$375 |
|
| MIH; repair |
$795 |
|
| MIP; RBE |
$810 |
|
| MH8; RBE |
$605 |
|
|
|
|
| MOTORIZED PROBE HEADS |
|
|
| PH9, PH9A, PH10M, PH10MQH: rectification and test |
$385 |
|
| Calibration |
$495 |
|
| Minor repair |
$895 |
|
| Major repair |
$1925 |
|
| PH9, PH9A; RBE |
$3575 |
|
|
|
|
|
|
|
| OPTICAL TRANSMISSION SYSTEMS |
|
|
| OMM (old model). The older model OMM does not have visual status LED's.
RBE is done to replace the old model with a new OMM which has visual status LED's. |
$545 |
|
| OMM (new model). Our latest model OMM which has visual LED's is repaired
with new parts plus a labor charge |
$80 |
|
| MP7/8/9/10 OMP modules; RBE |
$525 |
|
| 12-volt Wide Angle OMP. This product is upgraded to a 9-volt Wide Angle
OMP; RBE |
$725 |
|
| 12-volt VTL OMP. This product is upgraded to a 9-volt VTL OMP; repaired |
$1015 |
|
| 12-volt 360° OMP. This product is upgraded to a 9-volt 360° OMP; RBE |
$740 |
|
| LT02 OMP repair |
$480 |
|
| MP3 360° (9V) OMP repair |
$480 |
|
| MP3 Wide Angle 9-volt OMP |
$480 |
|
|
|
|
| PROBES: REPAIR |
|
|
| TP2 6 way |
$540 |
|
|
|
|
| PROBES: RBE |
|
|
| SP2-1 |
$1775 |
|
| TP7M |
$1025 |
|
| TP200; probe module only |
$870 |
|
| TP200 stylus module standard force |
$630 |
|
| TP200 stylus module low force |
$630 |
|
| MP700; probe module only |
$810 |
|
| MP700 35° OMP module |
$610 |
|
| MP700 70° OMP module |
$610 |
|
| TP1/S probe |
$730 |
|
| TP2 - 5 way |
$740 |
|
| TP6 |
$730 |
|
| BLP2 |
$625 |
|
| LP2 |
$625 |
|
| LP2H |
$625 |
|
| MP1R |
$625 |
|
| MP1S |
$625 |
|
| MP3 |
$625 |
|
| MP4* |
$625 |
|
| MP6* |
$625 |
|
| MP7/8/9/10; probe module only |
$625 |
|
| MP7/8/9/10 OMP module |
$525 |
|
| MP11 |
$625 |
|
| RP1 |
$610 |
|
| RP2 |
$610 |
|
| CP1 |
$525 |
|
| MP12 |
$915 |
|
| *Probe module only; additional charge for base |
|
|
|
|
|
| RADIO TRANSMISSION SYSTEM |
|
|
| MP14 Transmitter (RMP) repair |
$480 |
|